Women’s boot sizing guide
Product measurements
When selecting your size, please note that R.M.Williams boots are crafted using US footwear sizing. Our women's boots can come in a range of fittings: D, and E, detailed below:
• D = Regular
• E = Wide
Each fitting within the same size varies by approximately 0.64cm or 1/4” in foot width. To find your ideal fit, please refer to the ‘Width' tab.
| RMW | UK | US | EUR | LENGTH (CM) |
|---|---|---|---|---|
| 5 | 2.5 | 5 | 22.1 | |
| 5.5 | 3 | 5.5 | 35 | 22.6 |
| 6 | 3.5 | 6 | 36 | 23 |
| 6.5 | 4 | 6.5 | 36.5 | 23.4 |
| 7 | 4.5 | 7 | 37 | 23.8 |
| 7.5 | 5 | 7.5 | 38 | 24.2 |
| 8 | 5.5 | 8 | 38.5 | 24.7 |
| 8.5 | 6 | 8.5 | 39 | 25.1 |
| 9 | 6.5 | 9 | 40 | 25.5 |
| 9.5 | 7 | 9.5 | 41 | 25.9 |
| 10 | 7.5 | 10 | 41.5 | 26.3 |
| 10.5 | 8 | 10.5 | 42 | 26.8 |
| 11 | 8.5 | 11 | 43 | 27.2 |
Measuring guide
A step by step guide on how to find your perfect size.
-
Follow these easy steps to get the right size. For the best fit, wear the socks you would usually wear with boots.
-
Step 1 Place your foot on a piece of paper. Mark the points at the back of the heel & big toe. Use a tape measure to measure the length in-between. This will give you boot size.
-
Step 2 Measure around your foot at it's widest point (just below the toes). Wrap the tape measure around your foot completely. This will give you your width measurement.
-
Step 3 Do the same for the other foot.
-
Step 4 Match the width & length measurements of your larger foot against our size chart. If you're in-between 2 fits or sizes, go with the larger one.
It's important to us that you are happy with your new purchase, that’s why we offer easy 60 day returns via post or in-store (where applicable).
Key Features
Comfort Lady Yearling boot
Handcrafted in Australia
Handcrafted by our skilled craftspeople at our iconic Adelaide workshop, this boot was made using one piece of leather with over 80 time-honoured techniques and processes.
Goodyear welt
The Goodyear welt has been used by bootmakers since 1862 due to its enduring strength and the ability for it to be re-soled, allowing you to enjoy your boots for years to come.
Comfort rubber sole
Our comfort rubber sole combines the durability of our classic rubber sole with additional cushioning technology built into the insole, providing you with all-day support.
"The rubber sole and comfort insole bring a hardy wearability to our iconic women's boot, establishing it as a style for modern living and dressing. Women have long paired the Lady Yearling with rugged denim and feminine dresses this new comfort fit gives them the support to wear it in any scenario with confidence."
Amy Barnes, Head of Footwear & Accessories Design
-
Care instructions
-
Pull up leather is known for its unique colour variations and the way it changes in appearance when stretched or pulled, creating a boot with highs and lows in tone.
The 'pull up' finishing technique infuses oils and waxes into the hide. The high oil content allows for lines and marks to form in the leather when it is pulled, rubbed or flexed as the oil moves around the hide.
Pull up leather starts as aniline leather - it is treated with transparent, water-soluble dye that permeates the leather's fibers. Aniline leather does not have a pigment coating on the surface of the leather which showcases the natural texture and features of the leather. After the aniline dye is applied, pull-up leather receives an additional treatment with oils and waxes.
Cleaning
Light marks and scratches can be rubbed out of the leather by rubbing with clean, warm fingertips. This replaces the oil where it has displaced as per the 'pull up' characteristics of this leather.
- Applying a very small amount of R.M.Williams leather conditioner into the mark or scratch is an effective way to remove it.
- Note: this may initially darken the appearance of the leather due to the additional oils being absorbed
Polishing
Use R.M.Williams Stockman's Natural Boot Polish to protect and maintain the look of your boots.
- Apply R.M.Williams Stockman's Natural Boot Polish with a clean cloth and rub in well.
- Allow polish to rest on the surface and penetrate leather for a minute.
- Finish with a buffing brush to obtain a high shine.
-
Note: pull up leather doesn't require frequent polishing.
Conditioning
R.M.Williams Leather Conditioner should be applied sparingly and gently. With a soft, clean cloth to revive the luster of the leather.
- Apply R.M.Williams Leather Conditioner evenly and sparingly on pull up leathers with a clean cloth or hands.
- Allow the conditioner to penetrate leather for approximately half an hour and then buff using a clean, dry, soft cloth in a back and forward motion.
- Note: this may initially darken the appearance of the leather due to the additional oils being absorbed.
-
Note: be careful not to over condition; leather also needs to breathe. We recommend conditioning your leather boots every 2-3 months, no matter how often you clean or polish them.
Alcohol-Free Formula
Horse Hair Bristles
-
-
Repair
-
EVERY BOOT NEEDS THE OCCASIONAL TUNE UP.
RM believed there was only one thing more comfortable than a new R.M.Williams boot. And that’s an old R.M.Williams boot, one that has become a trusted friend, that has shaped itself exactly to the eccentricities of you foot.
For this reason, we recommend paying close attention to the condition of your boots and taking them to a quality cobbler for repairs, as soon as an damage begins to show.
Delivery and returns
-
Delivery is free for orders over US$250Premium DHL service
- Free for orders over US$250
- $30 for orders under US$250
- 'In stock' items estimated delivery within 3 - 5 business days
- All 'special order' items are shipped in 4 - 6 weeks
Extended returns*60 day return period- Return via post
- In-store exchange & return - exchanges only processed in-store
- Refunds processed within 10 business days of return
- *Returns or exchanges are not accepted for Made On Demand purchases.
-
