Made in Australia

Moriarty boot

$619.00

Pull-up Leather

An elegant, low-heeled boot for everyday wear, characterised by an almond toe, low profile and comfort insole. It's in Australia from premium pull-up leather with a natural goodyear welt.

Pull-up leather
Almond toe
Rubber sole and flat 3cm heel
3/4 flat welt
Goodyear welt construction
Leather lined
Comfort insole
Elastic-sided
Double-branded woven tugs
Pull-up leather upper
Crafted from one piece of leather
Made in Australia
Product code: B555P.24QDNH

Colour

Mid Brown

Width

Regular

Sizing (US)

In stock

In stock items delivered in 2-4 business days.

Women’s boot sizing guide

Product measurements

When selecting your size, please note that R.M.Williams boots are crafted using US footwear sizing. Our women's boots can come in a range of fittings: D, and E, detailed below:

• D = Regular
• E = Wide

Each fitting within the same size varies by approximately 0.64cm or 1/4” in foot width. To find your ideal fit, please refer to the ‘Width' tab.

Size
Width

RMW	UK	US	EUR	LENGTH (CM)
5	2.5	5		22.1
5.5	3	5.5	35	22.6
6	3.5	6	36	23
6.5	4	6.5	36.5	23.4
7	4.5	7	37	23.8
7.5	5	7.5	38	24.2
8	5.5	8	38.5	24.7
8.5	6	8.5	39	25.1
9	6.5	9	40	25.5
9.5	7	9.5	41	25.9
10	7.5	10	41.5	26.3
10.5	8	10.5	42	26.8
11	8.5	11	43	27.2

RMW	Regular - D	Wide - E
5	20.6	21.3
5.5	21	21.6
6	21.3	21.9
6.5	21.6	22.3
7	21.9	22.6
7.5	22.3	22.9
8	22.6	23.2
8.5	22.9	23.5
9	23.2	23.8
9.5	23.5	24.1
10	23.8	24.4
10.5	24.1	24.8
11	24.4	25.1

Measuring guide

A step by step guide on how to find your perfect size.

Follow these easy steps to get the right size. For the best fit, wear the socks you would usually wear with boots.
Step 1 Place your foot on a piece of paper. Mark the points at the back of the heel & big toe. Use a tape measure to measure the length in-between. This will give you boot size.
Step 2 Measure around your foot at it's widest point (just below the toes). Wrap the tape measure around your foot completely. This will give you your width measurement.
Step 3 Do the same for the other foot.
Step 4 Match the width & length measurements of your larger foot against our size chart. If you're in-between 2 fits or sizes, go with the larger one.

Shop with confidence | Premium delivery service | Easy 60 day returns

It's important to us that you are happy with your new purchase, that’s why we offer easy 60 day returns via post or in-store (where applicable).

Moriarty boot

$619.00

Width:

Size:

Care instructions
- Pull up leather is known for its unique colour variations and the way it changes in appearance when stretched or pulled, creating a boot with highs and lows in tone.
  
  The 'pull up' finishing technique infuses oils and waxes into the hide. The high oil content allows for lines and marks to form in the leather when it is pulled, rubbed or flexed as the oil moves around the hide.
  
  Pull up leather starts as aniline leather - it is treated with transparent, water-soluble dye that permeates the leather's fibers. Aniline leather does not have a pigment coating on the surface of the leather which showcases the natural texture and features of the leather. After the aniline dye is applied, pull-up leather receives an additional treatment with oils and waxes.
  
  Cleaning
  
  Light marks and scratches can be rubbed out of the leather by rubbing with clean, warm fingertips. This replaces the oil where it has displaced as per the 'pull up' characteristics of this leather.
  - Applying a very small amount of R.M.Williams leather conditioner into the mark or scratch is an effective way to remove it.
  - Note: this may initially darken the appearance of the leather due to the additional oils being absorbed
  Polishing
  
  Use R.M.Williams Stockman's Natural Boot Polish to protect and maintain the look of your boots.
  - Apply R.M.Williams Stockman's Natural Boot Polish with a clean cloth and rub in well.
  - Allow polish to rest on the surface and penetrate leather for a minute.
  - Finish with a buffing brush to obtain a high shine.
  - Note: pull up leather doesn't require frequent polishing.
  Conditioning
  
  R.M.Williams Leather Conditioner should be applied sparingly and gently. With a soft, clean cloth to revive the luster of the leather.
  
  Apply R.M.Williams Leather Conditioner evenly and sparingly on pull up leathers with a clean cloth or hands.
  
  Allow the conditioner to penetrate leather for approximately half an hour and then buff using a clean, dry, soft cloth in a back and forward motion.
  Note: this may initially darken the appearance of the leather due to the additional oils being absorbed.
  
  Note: be careful not to over condition; leather also needs to breathe. We recommend conditioning your leather boots every 2-3 months, no matter how often you clean or polish them.
  Stockmans Boot Polish
  
  Alcohol-Free Formula
  
  Medium Polish Brush
  
  Horse Hair Bristles
Repair
- Every boot needs the occasional tune up
  
  RM believed there was only one thing more comfortable than a new R.M.Williams boot. And that’s an old R.M.Williams boot, one that has become a trusted friend, that has shaped itself exactly to the eccentricities of your foot. Such a boot is to be treasured, to be maintained and preserved for years of faithful, comfortable wear. This is why we offer our Boot Repair Service.
  
  Resole and heel
  
  The removal and replacement of the outer soles and heels.
  
  Replace heel stack
  
  The heel stack is the stack of leather above the heel rubber that makes up the heel.
  
  Replace heel rubber
  
  The heel rubber can be replaced individually.
Delivery and returns
- Delivery is free for orders AU$75 and over
  
  Standard StarTrack service
  
  Free for orders AU$75 and over.
  
  AU$10 for orders under AU$75.
  
  'In stock' items estimated delivery within 2 - 4 business days.
  
  All 'special order' items are shipped in 4 - 6 weeks
  
  Repair service lead time 6 - 8 weeks
  Complimentary & easy returns*
  
  60 day return period
  
  Return via Australia Post or Parcelpoint
  
  Drop off parcel at your nearest Australia Post or Parcelpoint location
  
  In-store exchange & return - exchanges only processed in-store
  
  You will receive your refund within 2 - 5 business days after we receive your return
  
  *Returns or exchanges are not accepted for Made On Demand purchases.

Moriarty boot

Care instructions

Repair

Delivery and returns

Explore our range